Skip to main content

DANCING LED USING 555 & 4017 IC

                 DANCING LED USING 555 & 4017 IC


COMPONENTS REQUIRED:


                    1)555 IC
                    2)4107 IC
                    3)CAPACITORS,RESISTORS
                    4)LED'S
                    5)CONNECTING WIRES

CIRCUIT DIAGRAM:



PROCEDURE:


           Connect the 555 ic on the breadboard and at first connect the 4th and 8th pin with wire.And next connect the 6th and 2nd pin with wire,At next connect the 10k resistor to pin6 and pin 7.Next connect the 10k resistor to the pin 7 and pin8(Depending upon this resistance the blinking speed of the led can be controlled).And next connect 10uf capacitor to pin 2 and pin 1,atlast connect pin 1 to Gnd and pin 8 to positive.
           Connect the 4017 IC to Breadboard and connect 8 and 13 pin to Gnd and next connect 16 pin to positive.Connect 555 output(pin 3) to 4017 14 pin.And next connect the 1uf capacitor to pin 5 and positive.Thus output comes in pin 1,2,3,4,5,6,7,9,11,12 connecting Led to that pin the Dancing Led works(The output of the pin shifts depending upon the wave generated by 555 IC and the output shift from one pin to another pin)

LETS CHECK HOW THE CIRCUIT WORKS:  





                                                   POWERED BY
                                                           NBSL

Comments

  1. Unknown19 June 2019 at 08:53

    This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Popular posts from this blog

India Space Research

INDIAN SPACE RESEARCH                                      The Technology is developing day by day and new innovations are coming out day by day. Many things are runs with help of satellites for example TV receiver, Weather Forecasting, Global positioning systems(GPS), Defense purposes. Thus Aerospace development is very important for an country. INDIA , places 5 th place in space developments. The ISRO is the Indian organization of space research Developments. What is ISRO? ISRO expands as Indian Space Research Organization, which is the Indian space Development organization. ISRO Ranks 5 th place in space research. Who founded ISRO?  Indian Space Research Organization (ISRO) was founded by Jawaharlal Nehru, who is the First Prime Minister of INDIA and Scientist Vikram Sarabhai, who is known as the father of space programs in the year 1962 as Indian National Com...
1 comment
Know More »

Creating Artificial Planet

Already our Earth is loosing the habitable tendency due to the deforestation, Climate changes, etc. These all causes our Earth as inhabitable planet, for life better we should move into another planet to move into another planet we could create our own planet. But, it is possible to build a planet as like Earth with Atmosphere, Air, Water, Moderate Temperature, Gravity, etc. Theoretically, it is said we could build a planet like Earth. We could build our own planet right in our solar system for constant temperature as we get in our planet “Earth”. We could probably use asteroids in our solar system to build our artificial planet, but we are having only lower amount of asteroids in our solar system so we cannot build a planet as we expected so we are going to use OORT CLOUD to build our Artificial Planet but problem with this OORT CLOUD is it is so far from our Earth, we haven’t still invented that fast vehicle to bring that materials here, so this case could not help us. We have ...
Post a Comment
Know More »

SOIL MOISTURE SENSOR USING ARDUINO WITH CONNECTION AND CODE

SOIL MOISTURE SENSOR USING ARDUINO WITH CONNECTION AND CODE Soil moisture sensor is the sensing element which determine the volumetric amount of water in the soil .The sensor sense the amount of water by passing an minute voltage at its terminal .Then when the water presence is detected it send an minute voltage to the amplifying circuit and it is further amplified and send to the Arduino. Components Required:                       1) Arduino                       2) Soil Moisture sensor                       3) Led                       4) Connecting wires...
2 comments
Know More »